rope lights, christmas rope lighting, LED rope lights, icicle lights

200 FOOT ROPE LIGHTING ROLLS

Rope Lighting is ideal for lighting building outlines, amusement themes, holiday light sculptures, trade show lighting, bars, and night clubs.
Flexible: easily shapes to design.
Installation: easy to install in stationary areas. We advise using U-channel for building surfaces to create straight outlines.
Heavy Duty – applicable in all weathers and indoors.
Available in twenty-six colors!

ONE SALE: 200' ROLL OF OUR PREMIUM FLEX ROPE LIGHTING (2-wire): $149.00
QUANTITY DISCOUNTS, CALL!

COLORS

Clear

Red

Yellow

Blue

Green

Black

Aqua Blue

Hell Fire

Dark Gray

Sakura Pink

Orange

Purple

Fluorescent Green

Fluorescent Orange

Fluorescent Pink

Pearl White

Pearl Red

Pearl Yellow

Pearl Blue

Pearl Green

Pearl Orange

Pearl Pink

Ruby Red

Emerald Green

Amethyst Purple

Sapphire Blue

Technical Specification: Two wire Rope Lighting

Voltage	12V	24V	110-120V
Unit Length	4"	8"	24"
Max Run	30'	60'	200'
Bulbs/foot	12	12	12
Wattage	2.52W/foot	2.52W/foot	3W/foot

Shape	Thickness	Average Life Span*	Package Size
Round	1/2 & 3/8" dia		200'

U-Channel track allows you to to create straight building perimeter outlines on most surfaces. Simply insert Rope lighting into track and mounting to U-channel to the surface to create straight lines of lighting. Ideal for wood, metal and brick surfaces on buildings! Comes in 3 foot pieces ($1.99 ea) 50 PCS per box.

NOTE: Some products below are for low voltage use only (12 or 24 volts)!

Name	Function
Power Cord & Power Connector	For connecting Flexilight to the power source. Cords and plugs meeting different safety standards are available.
Splice Connector (24V)	Traditional screw-on type plastic connector between 2 pieces of Flexilight
Easy Splice Connector (24V)	For connecting 2 pieces of Flexilight in a less visible way, usually used together with a shrinkable tube to seal the connection.
Heat Shrink Tube (24v)	For sealing open connection between 2 pieces of Flexilight, usually used with an Easy Splice Connector
End Cap (24V)	In a segment of Flexilight, one end is the power cord, the other end must be covered with an End Cap to prevent the user from touching the tin wires carrying electricity.
Mounting Clip	Nailed on wood/stone/concrete surface, or sticked on iron/glass surface, allowing Flexilight to be easily snapped in.
Suction Cup	Used with Tie Strap, for fixing Flexilight on a smooth and flat surface.
Channel	U-shaped clear channel nailed on wood/stone/concrete surface, or sticked on iron/glass surface, for fixing a straight line of Flexilight.
T-Connector (24V)	Traditional screw-on type plastic connector for joining 3 pieces of Flexilight into a T-shape.
PVC T-Connector (24V)	Same function as the T-Connector, except that it's made of clear PVC without the screw like connection.
Y-Cord	For connecting 2 pieces of Flexilight to the same power source or controller.
Splice Cable (24V)	For elongating the connection of 2 pieces of Flexilight. Splice Cable is suitable for connecting several parts of a Flexilight decoration which have to be separated at a certain interval while maintaining the lighting effect at the same time.
Extension Cable	For elongating the length between Flexilight and a power cord.
Housing Clamp	Strong weatherproof connection between 2 pieces of Flexilight. The Housing Clamp needs to be filled with silicon glue and tightened with screws.Users can assemble the Housing Clamp themselves.
Power Cord with Housing Clamp	Strong weatherproof power cord connection for Flexilight. The Housing Clamp needs to be filled with silicon glue and tightened with screws. Users can assemble the Housing Clamp themselves.

Note: 120 volt Rope Lighting can not be altered or cut and is recommended for stationary areas.

*Note actual life will vary with application and handling and these are factory estimates! Specification subject to change without notice and to vary from different product line. Copyright © Santa's Lites Display Ltd. Calgary, AB Canada. All Rights Reserved. Reproduction in whole or in part in any form or medium without expressed written permission of Santa’s Lites Display Ltd is prohibited. We are not responsible for errors or omissions regarding products on this site. Updated : Tuesday, 13 May 2008.