LED Rope Light Super Bright

120V led ROPE LIGHT: 99/ 150 Foot Roll super BRIGHT LED ROPE LIGHT

Item No.	Max length	length	Spacing	INCREMENT	Color	watts/ft	Price roll
LED-DL-2W-99FT-EX-W	300’	99'	1”	36”	WHITE SUPER BRIGHT (5500K)	0.96	$229.00 EA.
LED-DL-2W-99FT-EX-WW	300’	99'	1”	36”	SUPER BRIGHT WARM WHITE	0.96	$239.00 EA.
NOTE: YOU CAN INTERCONNECT TWO 99' ROLLS TOGETHER . DO NOT EXCEED 300'.

Item No.	roll length	Max. length	Spacing	INCREMENT	Color	watts/ft	Price roll
LED-DL-2W-150Ft-W	150'	300'	1”	36”	SUPER WHITE BRIGHT	0.96	$279.00
IFL65W-150-G	150'	150'	1”	36”	TRUE GREEN	0.88	$399.00
LED-DL-2W-150FT-EX-B	150'	300'	1”	36”	BLUE	0.96	$289.00
LED-DL-2W-150Ft-Y	150	300'	1”	60”	YELLOW	0.53	$235.00
IFL65W-153-R	153'	153'	1”	60”	RED	0.53	$275.00
IFL65W-153-P	150'	153'	1”	60”	PINK	0.53	$599.00
IFL65W-153-PP	150'	153'	1”	60”	PURPLE	0.53	$599.00

low voltage LED Rope Light - power supply not included

24 volt dc- Roll 1/2" ROUND LED Rope Light

Item No.	length	width	led Spacing	mark	COLOR	watts/ft	Price roll
LED-13MM-2W-50FT 24V-NW	50'	1/2"	1"	6.5"	SUPER WHITE	0.96	129.00
LED-2W-13MM-20M-24V-G	65'	1/2"	1”	6.5"	GREEN	0.96	$169.00
LED-2W-13MM-20M-24V-B	150'	1/2"	1”	6.5"	BLUE	0.88	$479.00
LED-2W-13MM-150ft-24V-Y	150'	1/2"	1”	6.5"	YELLOW	0.53	$355.00
LED-2W-13MM-20M-24V-R	65'	1/2"	1”	6.5"	RED	0.53	$79.00

12 VOLT DC 65 & 50 FOOT ROLL ROUND LED ROPE LIGHT WITH PIGTAIL WIRE CONNECTOR

Item No.	roll length	Spacing	WIDTH	mark	Color	watts/ft	Price roll
LED-13MM-2W-50FT 12V-NW	50’	1”	1/2"	4” (3 LEDS)	SUPER WHITE	0.96	$129.00
LED-2W-13MM-20M-12V-G	65’	1”	1/2"	4” (3 LEDS)	GREEN	0.88	-
IFL-85-BL-24V	150'	1”	1/2"	4” (3 LEDS)	BLUE	0.88	$479.00
LED-2W-13MM-20M-12V-Y	50’	1”	1/2"	6” (6LEDS)	YELLOW / AMBER	0.48	$79.00

Please note that Cool White LED's have a colder color temperature making them have a very white and "slight" blue-ish look to them compared to the incandescent light that has a more yellow look. Warm white is closer to the yellow light spectrum.
Attention: Low voltage (12 or 24 volt) LED ROPE LIGHTING is for commercial use and sale only. Qualified trades people that are familiar and knowledgeable with general construction and electrical installation techniques should only do the installation. Licensed electricians should provide all installation and hook-up of both the primary input and secondary outputs of the Power Supply. All installation and hook-up should be done in accordance with all national and local codes. Transformers that may be required should be provided by the licensed electrician in accordance electrical codes and laws.
U-Channel track
U-Channel track allows you to to create straight building perimeter outlines on most surfaces: attach LED Rope lighting into track for easy mounting and straight lines of lighting. Ideal for wood, metal and brick surfaces on buildings! Comes in 3 foot pieces 50 PCS per box. One box will of 50 equals 150' in U-channel.

LED ROPE LIGHT ACCESSORIES 12/24 (LOW VOLTAGE USE ONLY).

ITEM	DESCRIPTION	PRICE
EC-1/2	1/2 Rope Light End Cap (12/24v). 5 PER PACKAGE	$2.00 PACK

PC-1/2	1/2" LED Rope Light Connector (12/24v) with end cap.	$5.00 ea.

CC-1/2	Splice Cable is suitable for connecting several parts of a Rope Lighting (12/24v).	$5.00 ea.

SC-1/2	1/2" Invisible Splice Connector Kit. Includes two connectors and one heat shrink. For 12/24 volts rope lighting.	$5.00 ea.

YC-1/2	1/2" Y_ Connector. For connecting 2 pieces of Rope Lighting to the same power source or controller. For 12/24 volts rope lighting.	$6.99 ea

NOTE:
Some products below are for low voltage Rope Lighting use only (12 or 24 volts)!

Name	Function
Power Cord & Power Connector	For connecting Rope Lighting to the power source. Cords and plugs meeting different safety standards are available.
Splice Connector (24 or 12V)	Traditional screw-on type plastic connector between 2 pieces of Rope Lighting
Easy Splice Connector (24 or 12V)	For connecting 2 pieces of Rope Lighting in a less visible way, usually used together with a shrinkable tube to seal the connection.
Heat Shrink Tube (24v)	For sealing open connection between 2 pieces of Rope Lighting, usually used with an Easy Splice Connector
End Cap (24V)	In a segment of Rope Lighting, one end is the power cord, the other end must be covered with an End Cap to prevent the user from touching the tin wires carrying electricity.
Mounting Clip	Nailed on wood/stone/concrete surface, or glued on iron/glass surface, allowing Rope Lighting to be easily snapped in.
Suction Cup	Used with Tie Strap, for fixing Rope Lighting on a smooth and flat surface.
Channel	U-shaped clear channel nailed on wood/stone/concrete surface, or glued on iron/glass surface, for fixing a straight line of Rope Lighting.
T-Connector (24V)	Traditional screw-on type plastic connector for joining 3 pieces of Rope Lighting into a T-shape.
PVC T-Connector (24V)	Same function as the T-Connector, except that it's made of clear PVC without the screw like connection.
Y-Cord	For connecting 2 pieces of Rope Lighting to the same power source or controller.
Splice Cable (24V)	For elongating the connection of 2 pieces of Rope Lighting. Splice Cable is suitable for connecting several parts of a Rope Lighting decoration which have to be separated at a certain interval while maintaining the lighting effect at the same time.
Extension Cable	For elongating the length between Rope Lighting and a power cord.
Housing Clamp	Strong weatherproof connection between 2 pieces of Rope Lighting. The Housing Clamp needs to be filled with silicon glue and tightened with screws. Users can assemble the Housing Clamp themselves.
Power Cord with Housing Clamp	Strong weatherproof power cord connection for Rope Lighting. The Housing Clamp needs to be filled with silicon glue and tightened with screws. Users can assemble the Housing Clamp themselves.

Important Notes:
120/110 volt Rope Lighting cannot be altered or cut. Please check with your locally governing body for regulations regarding product use.
*Actual product will vary form pictures and specifications are subject to change without notice. Life of LED's will vary depending on installation and use. Average life of LEDs has been provided by the manufacturer. Copyright. All rights reserved. Copyright 2009.